GR442QR7LB102KW01L Datasheet, PDF (205/237 Pages) Murata Manufacturing Co., Ltd. – chip monolithic ceramic capacitors

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
(3) Dimensions of Reel
2.0±0.5
ø13±0.2
ø21±0.8
13.0±1.0 (Tape width 8mm)
17.0±1.0 (Tape width 12mm)
C02E.pdf
Oct.1,2012
Package
9.0
+1.0
-0
(Tape
width
8mm)
+1.0
13.0 -0 (Tape width 12mm)
(in mm)
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shown at right.
e The top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of 5
pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
±0.3mm.
u Peeling off force: 0.1 to 0.6N in the direction shown at
right.
Vacant section Chip mounting unit Vacant section
160 min.
Direction of feed
190 min.
210 min.
(Top Tape or Cover Tape alone)
(in mm)
165 ^{to 180°}
Top Tape or Cover Tape
Base Tape
187