GR442QR7LB102KW01L Datasheet, PDF (2/237 Pages) Murata Manufacturing Co., Ltd. – chip monolithic ceramic capacitors

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
Explanation of Symbols in This Catalog
Ultra- ^{Lx W dimension: products of 0.6 x 0.3 mm or less}
compact
HiQ
Low dissipation for high frequency
By devising ceramic materials and electrode materials,
low dissipation is achieved in frequency bands of VHF,
UHF and microwave or beyond.
Low
ESL
Low inductance
This capacitor is designed so that
the parasitic inductance component (ESL)
that the capacitor has on the high frequency
side becomes lower.
Anti- ^{Product suitable for acoustic noise reduction and low distortion}
noise This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
Deflecting ^{Product resistant to deflection cracking}
crack This capacitor is designed to prevent failures as much
as possible by short mode caused by cracking
when there is board deflection.
Soldering ^{Product with solder cracking suppression}
crack This capacitor is configured with metal terminals
and leads connected to the chip.
The metal terminals and leads relieve the stress from expansion
and contraction of the solder, to suppress solder cracking.
Derating ^{Voltage and temperature derating recommended product}
This product is suitable when a voltage continuously applied
to a capacitor in an operating circuit, is used below (derated)
the rated voltage of the capacitor.
This model guarantees the test conditions in the endurance test,
at a rated voltage x 100% at the maximum operating temperature.
A reliability assurance level equivalent to a common product
can be secured, by using this product within the voltage and
temperature derated conditions recommended in the figure below.
s_{Recommended Conditions of the Derating Operating Voltage and Temperature}
120
100
125°C Type
80
105°C Type
85°C Type
60
40
20
0
0
25
50
75
100
125
150
Product Temperature (°C)
EU RoHS
Compliant
s_{All the products in this catalog comply with EU RoHS.}
s_{EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use}
of Certain Hazardous Substances in Electrical and Electronic Equipment."
s_{For more details, please refer to our website 'Murata's Approach for EU RoHS'}
(http://www.murata.com/info/rohs.html).
For General Purpose GRM Series Capacitance Table