MC68HC705P9 Datasheet, PDF (140/156 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Specifications _{5.0 V Control Timing}
5.0 V Control Timing
Table 6. Control Timing (V_DD = 5.0 Vdc)⁽¹⁾
Characteristic
Symbol Min Max Unit
Oscillator Frequency
Crystal
External Clock
f_OSC
— 4.2 MHz
dc 4.2
Internal Operating Frequency (f_OSC ÷ 2)
Crystal
External Clock
f_OP
— 2.1 MHz
dc 2.1
Cycle Time (1 ÷ f_OP)
Crystal Oscillator Startup Time
Stop Recovery Startup Time (Crystal
Oscillator)
t_CYC
t_OXOV
t_ILCH
480 — ns
— 100 ms
— 100 ms
RESET Pulse Width
t_RL
1.5
—
t_CYC
Timer
Resolution⁽²⁾
Input Capture Pulse Width
Input Capture Pulse Period
t_RESL
4.0
—
t_CYC
t_H, t_L
t_TLTL
125 — ns
Note⁽³⁾ — t_CYC
Interrupt Pulse Width Low (Edge-Triggered)
Interrupt Pulse Period
t_ILIH
125 — ns
t_ILIL
Note⁽⁴⁾ — t_CYC
OSC1 Pulse Width
t_OH, t_OL
90
— ns
RC Oscillator Stabilization Time
t_RCON
—
5 µs
ADC On Current Stabilization Time
t_ADON
— 100 µs
1. V_DD = 5.0 Vdc ±10%, V_SS = 0 Vdc, T_A = T_L to T_H unless otherwise noted
2. A 2-bit prescaler in the timer is the limiting factor as it counts 4 t_CYC
3. The minimum t_TLTL should not be less than the number of interrupt service routine cycles
plus 19 t_CYC
4. The minimum t_ILIL should not be less than the number of interrupt service routine cycles
plus 19 t_CYC
10-mc68hc705p9
140
Specifications
MOTOROLA