PIC16LF1526 Datasheet, PDF (87/354 Pages) Microchip Technology – 64-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1526/27
7.6.8 PIR3 REGISTER
The PIR3 register contains the interrupt flag bits, as
shown in Register 7-8.
Note:
Interrupt flag bits are set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the Global
Enable bit, GIE, of the INTCON register.
User software should ensure the
appropriate interrupt flag bits are clear prior
to enabling an interrupt.
REGISTER 7-8: PIR3: PERIPHERAL INTERRUPT REQUEST REGISTER 3
R/W-0/0
CCP6IF
bit 7
R/W-0/0
CCP5IF
R/W-0/0
CCP4IF
R/W-0/0
CCP3IF
R/W-0/0
TMR6IF
R/W-0/0
TMR5IF
R/W-0/0
TMR4IF
R/W-0/0
TMR3IF
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7
CCP6IF: CCP6 Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 6
CCP5IF: CCP5 Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 5
CCP4IF: CCP4 Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 4
CCP3IF: CCP3 Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 3
TMR6IF: TMR6 to PR6 Match Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 2
TMR5IF: Timer5 Overflow Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 1
TMR4IF: TMR4 to PR4 Match Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
bit 0
TMR3IF: Timer3 Overflow Interrupt Flag bit
1 = Interrupt is pending
0 = Interrupt is not pending
 2011 Microchip Technology Inc.
Preliminary
DS41458A-page 87