PIC16LF1526 Datasheet, PDF (139/354 Pages) Microchip Technology – 64-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1526/27
REGISTER 12-30: LATG: PORTG DATA LATCH REGISTER
U-0
—
bit 7
U-0
U-0
R/W-x/u
R/W-x/u
—
—
LATG4
LATG3
R/W-x/u
LATG2
R/W-x/u
LATG1
R/W-x/u
LATG0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-5
bit 4-0
Unimplemented: Read as ‘0’
LATG<4:0>: PORTG Output Latch Value bits⁽¹⁾
Note 1: Writes to PORTG are actually written to corresponding LATG register. Reads from PORTG register is
return of actual I/O pin values.
REGISTER 12-31: ANSELG: PORTG ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
U-0
R/W-1
R/W-1
R/W-1
—
—
ANSG4
ANSG3
ANSG2
R/W-1
ANSG1
U-0
—
bit 0
Legend:
R = Readable bit
u = bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-5
bit 4-1
bit 0
Unimplemented: Read as ‘0’
ANSG<4:1>: Analog Select between Analog or Digital Function on Pins RG<4:1>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input⁽¹⁾. Digital input buffer disabled.
Unimplemented: Read as ‘0’
Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
 2011 Microchip Technology Inc.
Preliminary
DS41458A-page 139