PIC16LF1526 Datasheet, PDF (309/354 Pages) Microchip Technology – 64-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1526/27
25.2 DC Characteristics: PIC16(L)F1526/27-I/E (Industrial, Extended) (Continued)
PIC16LF1526/7
PIC16F1526/7
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D020
—
1.0
—
mA
3.0 FOSC = 20 MHz
—
1.2
—
mA
3.6 ^{HS Oscillator mode}
D020
—
1.4
—
mA
3.0 FOSC = 20 MHz
—
1.7
—
mA
5.0 ^{HS Oscillator mode}
D021
—
300
—
A
1.8 FOSC = 4 MHz
—
500
—
A
3.0 ^{EXTRC mode (Note 3)}
D021
—
165
—
A
2.3 FOSC = 4 MHz
—
280
—
A
3.0 ^{EXTRC mode (Note 3)}
—
350
—
A
5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
 2011 Microchip Technology Inc.
Preliminary
DS41458A-page 309