PIC16LF1526 Datasheet, PDF (133/354 Pages) Microchip Technology – 64-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1526/27
REGISTER 12-22: ANSELE: PORTE ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
U-0
U-0
U-0
R/W-1
—
—
—
—
ANSE2
R/W-1
ANSE1
R/W-1
ANSE0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-3
bit 2-0
Unimplemented: Read as ‘0’
ANSE<2:0>: Analog Select between Analog or Digital Function on pins RE<2:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input⁽¹⁾. Digital input buffer disabled.
Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
REGISTER 12-23: WPUE: WEAK PULL-UP PORTE REGISTER
R/W-1/1
WPUE7
bit 7
R/W-1/1
WPUE6
R/W-1/1
WPUE5
R/W-1/1
WPUE4
R/W-1/1
WPUE3
R/W-1/1
WPUE2
R/W-1/1
WPUE1
R/W-1/1
WPUE0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
WPUE<7:0>: Weak Pull-up Register bits
1 = Pull-up enabled
0 = Pull-up disabled
Note 1: Global WPUEN bit of the OPTION_REG register must be cleared for individual pull-ups to be enabled.
2: The weak pull-up device is automatically disabled if the pin is in configured as an output.
TABLE 12-12: SUMMARY OF REGISTERS ASSOCIATED WITH PORTE
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Register
on Page
APFCON
ANSELE
LATE
PORTE
TRISE
WPUE
Legend:
—
—
—
—
—
—
T3CKISEL CCP2SEL 124
—
—
—
—
—
ANSE2 ANSE1 ANSE0
133
LATE7
LATE6
LATE5
LATE4
LATE3
LATE2
LATE1
LATE0
132
RE7
RE6
RE5
RE4
RE3
RE2
RE1
RE0
132
TRISE7 TRISE6 TRISE5 TRISE4 TRISE3 TRISE2 TRISE1 TRISE0
132
WPUE7 WPUE6 WPUE5 WPUE4 WPUE3 WPUE2 WPUE1 WPUE0
133
x = unknown, u = unchanged, - = unimplemented locations read as ‘0’. Shaded cells are not used by PORTE.
 2011 Microchip Technology Inc.
Preliminary
DS41458A-page 133