PIC16LF1526 Datasheet, PDF (16/354 Pages) Microchip Technology – 64-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1526/27
TABLE 1-2: PIC16(L)F1526 PINOUT DESCRIPTION (CONTINUED)
Name
Function
Input Output
Type Type
Description
RG0/CCP3
RG0
ST CMOS General purpose I/O.
CCP3
ST CMOS Capture/Compare/PWM3.
RG1/AN15/TX2/CK2
RG1
ST CMOS General purpose I/O.
AN15
AN
— A/D Channel 15 input.
TX2
— CMOS USART2 asynchronous transmit.
RG2/AN14/RX2/DT2
CK2
RG2
ST CMOS USART2 synchronous clock.
ST CMOS General purpose I/O.
AN14
AN
— A/D Channel 14 input.
RX2
ST
— USART2 asynchronous input.
DT2
ST CMOS USART2 synchronous data.
RG3/AN13/CCP4
RG3
ST CMOS General purpose I/O.
AN13
AN
— A/D Channel 13 input.
CCP4
ST CMOS Capture/Compare/PWM4.
RG4/AN12/T5G/CCP5
RG4
ST
— General purpose input.
AN12
AN
— A/D Channel 12 input.
T5G
ST
— Timer5 Gate input.
RG5/MCLR/VPP
CCP5
RG5
MCLR
ST CMOS Capture/Compare/PWM5.
ST
— General purpose input with WPU.
ST
— Master Clear with internal pull-up.
VPP
HV
— Programming voltage.
AVDD
AVDD Power — Analog positive supply.
AVSS
AVSS Power — Analog ground reference.
VDD
VDD Power — Positive supply.
VSS
VSS
Power — Ground reference.
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I²C™ = Schmitt Trigger input with I²C
HV = High Voltage
XTAL = Crystal
levels
Note 1: Peripheral pin location selected using APFCON register. Default location.
2: Peripheral pin location selected using APFCON register. Alternate location.
3: RC3, RC4, RD5 and RD6 read the I²C ST input when I²C mode is enabled.
DS41458A-page 16
Preliminary
 2011 Microchip Technology Inc.