1EDI2002AS_15 Datasheet, PDF (89/147 Pages) Infineon Technologies AG – Single Channel Isolated Driver for Inverter Systems AD Step

Field
STPER
SPIER
VMTO
GER
OVLO3ER
OTER
OSTER
EiceDRIVER™ SIL
1EDI2002AS
Register Description
Bits
Type Description
9
rhs
Shoot Through Protection Error Flag
This bit indicates if a shoot through protection error event
has been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
Note: This bit can not be cleared while an error condition
is active (bit PSTAT2.STP set).
8
rhs
SPI Error Flag
This indicates if an SPI error event has been detected.
0_B: No error event has been detected.
1_B: An error event has been detected.
This bit is sticky.
7
rh
Verif. Mode Time-Out Flag
This bit indicates if a verification mode time-out event has
been detected.
0_B: No time-out event has been detected.
1_B: A time-out event has been detected.
Note: This bit is a mirror of bit SER.VMTO.
6
rh
GATE Monitoring Error Flag
This bit indicates if a GATE monitoring timer overflow
occurred during a switching sequence.
0_B: No error event has been detected.
1_B: An error event has been detected.
Note: This bit is a mirror of bit SER.GER.
5
rh
OVLO3 Error Flag
This bit indicates if an Overvoltage Lockout event on V_EE2
has been detected.
0_B: No error event has been detected.
1_B: An error event has been detected.
Note: This bit is a mirror of bit SER.OVLO3ER.
4
rh
Overtemperature Error Flag
This bit indicates if an overtemperature condition has
been detected.
0_B: No event has been detected.
1_B: An event has been detected.
Note: This bit is a mirror of bit SER.OTER.
3
rh
Output Stage Tristate Event Flag
This bit indicates if the output stage has been tristated.
0_B: No tristate event has been detected.
1_B: A tristate event has been detected.
Note: This bit is a mirror of bit SER.OSTER.
Datasheet
89
Hardware Description
Rev. 3.1, 2015-07-30