1EDI2002AS_15 Datasheet, PDF (130/147 Pages) Infineon Technologies AG – Single Channel Isolated Driver for Inverter Systems AD Step

EiceDRIVER™ SIL
1EDI2002AS
Specification
5.2
Absolute Maximum Ratings
Stress above the maximum values listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Table 5-2 Absolute Maximum Ratings¹⁾
Parameter
Symbol
Values
Unit Note / Test Condition
Min.
Typ.
Max.
Junction temperature
T_JUNC
-40
-
Storage temperature
T_STO
-55
-
Positive power supply (primary) V_CC1
-0.3
-
Positive power supply
(secondary)
V_CC2
-0.3
-
150
°C
150
°C
6.0
V Referenced to GND1
28
V Referenced to GND2
Negative power supply
V_EE2
-13
-
Power supply voltage difference V_DS2
-
-
(secondary) V_CC2-V_EE2
Voltage on any I/O pin on primary V_IN1
-0.3
-
side except INP, INSTP, EN/FEN
0.3
V Referenced to GND2
40
V
6.0
V Referenced to GND1
Voltage on INP, INSTP, EN/FEN V_INR1 -0.3
-
pins
6.0
V Referenced to REF0
Voltage difference between
V_DG1
-5
-
REF0 and GND1
5
V
Voltage difference between
V_OCPG2 -0.3
-
OCPG and GND2
0.3
V
Output current on push-pull I/O I_OUTPP1 -
-
20
mA
on primary side
Output current on push-pull I/O I_OUTPP2 -
-
5
mA
on secondary side
Output current on open drain I/O I_OUTOD1 -
-
20
mA
on primary side
Output current on pin OSD,
I_OUTOD2 -
-
5
mA
NUV2
Voltage on 5 V pin on secondary V_IN52
-0.3
-
side.
6.5
V Referenced to GND2
Voltage on 15 V pin on
secondary side.
V_IN152
V_EE2-0.3 -
V_CC2+0.3 V
Referenced to GND2,
except DESAT
Voltage on DESAT pin.
ESD Immunity
V_INDESAT -0.3
-
V_ESD
-
-
-
-
20
V Referenced to GND2
2
kV HBM²⁾
750
V CDM³⁾, pins 1, 16, 17, 36
500
V CDM³⁾, all other pins
MSL Level
MSL n.a.
3
n.a.
1) Not subject to production test. Absolute maximum Ratings are verified by design / characterization.
2) According to EIA/JESD22-A114-B.
3) According to JESD22-C101-C.
Datasheet
130
Hardware Description
Rev. 3.1, 2015-07-30