1EDI2002AS_15 Datasheet, PDF (109/147 Pages) Infineon Technologies AG – Single Channel Isolated Driver for Inverter Systems AD Step

Field
OSTER
CER2
0
LMI
P
EiceDRIVER™ SIL
1EDI2002AS
Register Description
Bits
Type Description
5
rhs
Output Stage Tristate Event Flag
This bit indicates if an output stage tristate event has
been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
Note: This bit can not be cleared if bit SSTAT.HZ is set.
4
rhs
Communication Error Secondary Flag
This indicates if a loss of communication event with the
primary chip has been detected by the secondary chip.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
3:2
r
Reserved
Read as 0_B.
1
rh
Last Message Invalid Notification
This bit indicates if the last received SPI Message was
correctly processed by the device.
0_B: Previous Message was processed correctly.
1_B: Previous Message was discarded.
0
rh
Parity Bit
Odd Parity Bit.
Datasheet
109
Hardware Description
Rev. 3.1, 2015-07-30