1EDI2002AS_15 Datasheet, PDF (108/147 Pages) Infineon Technologies AG – Single Channel Isolated Driver for Inverter Systems AD Step

Field
OVLO2ER
UVLO3ER
VMTO
GER
OVLO3ER
OTER
EiceDRIVER™ SIL
1EDI2002AS
Register Description
Bits
Type Description
11
rhs
OVLO2 Error Flag
This bit indicates if an Overvoltage Lockout event (on
V_CC2) has been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
Note: This bit can not be cleared while an error condition
is active (bit SSTAT2.OVLO2M set).
10
rhs
UVLO3 Error Flag
This bit indicates if an Undervoltage Lockout event (on
V_EE2) has been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
Note: This bit can not be cleared while an error condition
is active (bit SSTAT2.UVLO3M set).
9
rhs
Verif. Mode Time-Out Flag
This bit indicates if time-out event in Verification Mode
has been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
8
rhs
Gate Monitoring Error Flag
This bit indicates in a Gate Monitoring error event has
been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
7
rhs
OVLO3 Error Flag
This bit indicates if an Overvoltage Lockout event (on
V_EE2) has been detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
Note: This bit can not be cleared while an error condition
is active (bit SSTAT2.OVLO3M set).
6
rhs
Overtemperature Error Flag
This bit indicates if an overtemperature event has been
detected.
0_B: No event has been detected.
1_B: An event has been detected.
This bit is sticky.
Note: This bit can not be cleared if bit SSTAT.OT is set.
Datasheet
108
Hardware Description
Rev. 3.1, 2015-07-30