MC68HC705J2 Datasheet, PDF (69/82 Pages) Freescale Semiconductor, Inc – member of the low-cost

Freescale Semiconductor, Inc.
11.4 DC Electrical Characteristics (V_DD = 5.0 Vdc)
Table 11-3. DC Electrical Characteristics (V_DD = 5.0 Vdc)
Characteristic
Symbol
Min
Typ
Max Unit
Output Voltage
I_load = 10.0 µA
I_load = –10.0 µA
Output High Voltage (I_load = –0.8 mA)
PA7–PA0, PB5–PB0
Output Low Voltage (I_load = 1.6 mA)
PA7–PA0, PB5–PB0
V_OL
—
—
0.1
V_OH
V_DD – 0.1 —
—
V
V_OH
V_DD – 0.8 —
—
V
V_OL
—
—
0.4
V
Input High Voltage
PA7–PA0, PB5–PB0, IRQ/V_PP, RESET, OSC1
Input Low Voltage
PA7–PA0, PB5–PB0, IRQ/V_PP, RESET, OSC1
Supply Current (See NOTES.)
Run
Wait
Stop
25 °C
–40 to +85 °C
V_IH
0.7 × V_DD
—
V_DD
V
V_IL
V_SS
—
0.2 × V_DD
V
—
5.0
7.0
mA
I_DD
—
1.3
2.5
mA
—
2.0
30
µA
—
—
100
µA
I/O Ports High-Z Leakage Current
PA7–PA0, PB5–PB0
I_OZ
—
—
10
µA
Input Current
RESET, IRQ/V_PP, OSC1
Capacitance
Ports (as input or output)
RESET, IRQ/V_PP
Programming Voltage
Programming Current
Programming Time/Byte
I_in
C_out
C_in
V_PP
I_PP
t_EPGM
—
—
±1
µA
—
—
12
pF
—
—
8
16.25
16.5
16.75
V
—
5
10
mA
4
—
—
ms
NOTES:
1. Typical values at midpoint of voltage range, 25 °C only.
2. Run (operating) I_DD and wait I_DD measured using external square wave clock source (f_osc = 4.2 MHz), all
inputs 0.2 V from rail; no dc loads; less than 50 pF on all outputs; C_L = 20 pF on OSC2.
3. Wait I_DD and Stop I_DD: all ports configured as inputs; V_IL = 0.2 V, V_IH = V_DD – 0.2 V.
4. Stop I_DD measured with OSC1 = V_SS.
5. Standard temperature range is 0 °C to 70 °C.
6. OSC2 capacitance linearly affects Wait I_DD .
7. Programming voltage measured at IRQ/V_PP pin.
Rev. 2
ELECTRICAL SPECIFICATIONS
For More Information On This Product,
Go to: www.freescale.com
11-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20