MC68340FE16E Datasheet, PDF (405/441 Pages) Freescale Semiconductor, Inc – Integrated Processor with DMA User’s Manual

Freescale Semiconductor, Inc.
11.5 DC ELECTRICAL SPECIFICATIONS (See notes (a), (b), (c), and (d) corresponding to part
operation, GND = 0 Vdc, TA = 0 to 70°C; see numbered notes)
Characteristic
Symbol
Min
Max
Unit
Input High Voltage (except clock)
Input Low Voltage
Clock Input High Voltage
Undershoot
VIH
2.0
VCC
V
VIL
GND
0.8
V
VIHC 0.7 _{*(V CC} ) VCC +0.3
V
—
—
–0.8
V
Input Leakage Current (All Input Only Pins) Vin = VCC or GND
Iin
–2.5
2.5
µA
Hi-Z (Off-State) Leakage Current (All Noncrystal Outputs and I/O Pins)
Vin = 0.5/2.4 V¹
IOZ
–20
20
µA
Signal Low Input Current
TMS, TDI
VIL = 0.8 V
Signal High Input Current
IL
–0.015
0.2
mA
TMS, TDI
VIH = 2.0 V
IH
–0.015
0.2
mA
Output High Voltage^{1, 2}
IOH = –0.8 mA, V _CC = 4.75 V
VOH
2.4
—
V
All Noncrystal Outputs except HALT, RESET, DONE2, DONE1
Output Low Voltage¹
VOL
—
IOL = 2.0 mA
CLKOUT, FREEZE, IPIPE, IFETCH
IOL = 3.2 mA
A23–A0, D15–D0, FC3–FC0, SIZ1, SIZ0
IOL = 5.3 mA
All Other Output Only and Group 2 I/O Pins
IOL = 15.3 mA
HALT, RESET
V
0.5
0.5
0.5
0.5
Total Supply Current at 5 V +5% @ 16.78 MHz
RUN³
LPSTOP (VCO Off)
Power Dissipation at 5 V +5% @ 16.78 MHz⁴
—
ICC
SICC
PD
—
180
mA
500
µA
945
mW
Total Supply Current at 3.3 V + 0.3 V @ 8.39 MHz
RUN⁵
LPSTOP (VCO Off)
Power Dissipation at 3.3 V +0.3 V @ 8.39 MHz6
Input Capacitance ⁷
All Input-Only Pins
All I/O Pins
—
ICC
SICC
PD
—
Cin
—
TBD
mA
TBD
µA
TBD
mW
pF
10
20
Load Capacitance ⁷
CL
—
100
pF
NOTES:
(a) The electrical specifications in this document for both the 8.39 and 16.78 MHz @ 3.3 V ±0.3 V are preliminary
and apply only to the appropriate MC68340V low voltage part.
(b) The 16.78-MHz specifications apply to the MC68340 @ 5.0 V ±5% operation.
(c) The 25.16 MHz @ 5.0 V ±5% electrical specifications are preliminary.
(d) For extended temperature parts TA = –40 to +85°C. These specifications are preliminary.
1. Input-Only Pins: BERR, BG, BKPT, BR, CTSB, CTSA, DREQ2, DREQ1, DSACK1, DSACK0, EXTAL, RxDB,
RxDA, SCLK, TCK, TDI, TGATE2, TGATE1, TIN2, TIN1, TMS
Output-Only Pins: A23–A0, AS, BG, CLKOUT, DACK2, DACK1, DS, FC3–FC0, FREEZE, IFETCH, IPIPE,
RMC, RTSB, RTSA, R/ W, R≈RDYA, SIZ1, SIZ0, TDO, TOUT2, TOUT1, TxDB, TxDA, T≈RDYA
Input/Output Pins:
Group 1: D15–D0
Group 2: A31–A24, CS3–CS0, DONE2, DONE1, IRQ7, IRQ5, IRQ3, MODCK
Group 3: HALT, RESET
2. VOH specification for HALT, RESET, DONE2, and DONE1 is not applicable because they are open-drain pins.
3. Supply current measured with system clock frequency of 16.78 MHz @ 5.25 V.
4. Power dissipation measured with a system clock frequency of 16.78 MHz, all modules active.
5. Supply current measured with system clock frequency of 8.39 MHz @ 3.6 V.
6. Power dissipation measured with a system clock frequency of 8.39 MHz, all modules active.
7. Capacitance is periodically sampled rather than 100% tested.
MOTOROLA
MC68340 USER’S MANUAL
11-5
For More Information On This Product,
Go to: www.freescale.com