|
MC68HC908LJ12 Datasheet, PDF (293/413 Pages) Freescale Semiconductor, Inc – 8-bit microcontroller units | |||
|
◁ |
Serial Peripheral Interface Module (SPI)
14.14 I/O Registers
Three registers control and monitor SPI operation:
⢠SPI control register (SPCR)
⢠SPI status and control register (SPSCR)
⢠SPI data register (SPDR)
14.14.1 SPI Control Register
The SPI control register:
⢠Enables SPI module interrupt requests
⢠Configures the SPI module as master or slave
⢠Selects serial clock polarity and phase
⢠Configures the SPSCK, MOSI, and MISO pins as open-drain
outputs
⢠Enables the SPI module
Address: $0010
Bit 7
6
5
4
3
2
1
Read:
SPRIE
Write:
R SPMSTR CPOL CPHA SPWOM SPE
Reset: 0
0
1
0
1
0
0
= Unimplemented
R = Reserved
Figure 14-13. SPI Control Register (SPCR)
Bit 0
SPTIE
0
SPRIE â SPI Receiver Interrupt Enable Bit
This read/write bit enables CPU interrupt requests generated by the
SPRF bit. The SPRF bit is set when a byte transfers from the shift
register to the receive data register. Reset clears the SPRIE bit.
1 = SPRF CPU interrupt requests enabled
0 = SPRF CPU interrupt requests disabled
Technical Data
294
Serial Peripheral Interface Module (SPI)
MC68HC908LJ12 â Rev. 2.1
Freescale Semiconductor
|
▷ |