MC68HC908LJ12 Datasheet, PDF (177/413 Pages) Freescale Semiconductor, Inc – 8-bit microcontroller units

Monitor ROM (MON)
10.6.5 MON_ERARNGE
In monitor mode, ERARNGE is used to erase a range of locations in
FLASH.
Table 10-15. MON_ERARNGE Routine
Routine Name
MON_ERARNGE
Routine Description Erase a page or the entire array, in monitor mode
Calling Address
$FF2C
Stack Used
11 bytes
Data Block Format
Bus speed
Data size
Starting address (high byte)
Starting address (low byte)
The MON_ERARNGE routine is designed to be used in monitor mode.
It performs the same function as the ERARNGE routine (see 10.6.2
ERARNGE), except that MON_ERARNGE returns to the main program
via an SWI instruction. After a MON_ERARNGE call, the SWI instruction
will return the control back to the monitor code.
Technical Data
178
Monitor ROM (MON)
MC68HC908LJ12 — Rev. 2.1
Freescale Semiconductor