MC68HC908LJ12 Datasheet, PDF (176/413 Pages) Freescale Semiconductor, Inc – 8-bit microcontroller units

Monitor ROM (MON)
10.6.4 MON_PRGRNGE
In monitor mode, MON_PRGRNGE is used to program a range of
FLASH locations with data loaded into the data array.
Table 10-14. MON_PRGRNGE Routine
Routine Name
MON_PRGRNGE
Routine Description Program a range of locations, in monitor mode
Calling Address
$FC28
Stack Used
16 bytes
Data Block Format
Bus speed
Data size
Starting address (high byte)
Starting address (low byte)
Data 1
:
Data N
The MON_PRGRNGE routine is designed to be used in monitor mode.
It performs the same function as the PRGRNGE routine (see 10.6.1
PRGRNGE), except that MON_PRGRNGE returns to the main program
via an SWI instruction. After a MON_PRGRNGE call, the SWI instruction
will return the control back to the monitor code.
MC68HC908LJ12 — Rev. 2.1
Freescale Semiconductor
Monitor ROM (MON)
Technical Data
177