MC68HC908LJ12 Datasheet, PDF (234/413 Pages) Freescale Semiconductor, Inc – 8-bit microcontroller units

Infrared Serial Communications Interface Module (IRSCI)
The SCI allows full-duplex, asynchronous, NRZ serial communication
between the MCU and remote devices, including other MCUs. The
transmitter and receiver of the SCI operate independently, although they
use the same baud rate generator. During normal operation, the CPU
monitors the status of the SCI, writes the data to be transmitted, and
processes received data.
NOTE:
For SCI operations, the IR sub-module is transparent to the SCI module.
Data at going out of the SCI transmitter and data going into the SCI
receiver is always in SCI format. It makes no difference to the SCI
module whether the IR sub-module is enabled or disabled.
NOTE: This SCI module is a standard HC08 SCI module with the following
modifications:
• A control bit, CKS, is added to the SCI baud rate control register
to select between two input clocks for baud rate clock generation
• The TXINV bit is removed from the SCI control register 1
13.7.1 Data Format
The SCI uses the standard non-return-to-zero mark/space data format
illustrated in Figure 13-6.
START
BIT
BIT 0
BIT 1
BIT 2
8-BIT DATA FORMAT
BIT M IN SCC1 CLEAR
BIT 3 BIT 4 BIT 5 BIT 6
PARITY
BIT
BIT 7
STOP
BIT
NEXT
START
BIT
START
9-BIT DATA FORMAT
BIT M IN SCC1 SET
PARITY
BIT
NEXT
START
BIT BIT 0 BIT 1 BIT 2 BIT 3 BIT 4 BIT 5 BIT 6 BIT 7 BIT 8 STOP BIT
BIT
Figure 13-6. SCI Data Formats
MC68HC908LJ12 — Rev. 2.1
Freescale Semiconductor Infrared Serial Communications Interface Module (IRSCI)
Technical Data
235