BCM4354KKWBGT Datasheet, PDF (129/192 Pages) Cypress Semiconductor – Single-Chip 5G Wi-Fi IEEE 802.11ac 2×2 MAC/ Baseband/Radio with Integrated Bluetooth 4.1 and FM Receiver

BCM4354 Data Sheet
Recommended Operating Conditions and DC Characteristics
Table 32: Recommended Operating Conditions and DC Characteristics (Cont.)
Value
Parameter
Output low voltage @ 2 mA
For VDDIO = 3.3V:
Input high voltage
Input low voltage
Output high voltage @ 2 mA
Output low Voltage @ 2 mA
Symbol
VOL
VIH
VIL
VOH
VOL
Minimum Typical Maximum Unit
–
–
0.45
V
2.00
–
–
–
VDDIO – –
0.4
–
–
–
V
0.80
V
–
V
0.40
V
RF Switch Control Output Pins^c
For VDDIO_RF = 3.3V:
Output high voltage @ 2 mA
Output low voltage @ 2 mA
Input capacitance
VOH
VOL
C_IN
VDDIO – –
0.4
–
–
–
–
–
V
0.40
V
5
pF
a. The BCM4354 is functional across this range of voltages. Optimal RF performance specified in the data sheet,
however, is guaranteed only for 3.13V < VBAT < 4.8V.
b. The maximum continuous voltage is 5.25V. Voltage transients up to 6.0V for up to 10 seconds, cumulative
duration over the lifetime of the device, are allowed. Voltage transients as high as 5.5V for up to 250 seconds,
cumulative duration over the lifetime of the device, are allowed.
c. Programmable 2 mA to 16 mA drive strength. Default is 10 mA.
Broadcom^®
October 15, 2014 • 4354-DS109-R
BROADCOM CONFIDENTIAL
Page 128