BCM4354KKWBGT Datasheet, PDF (126/192 Pages) Cypress Semiconductor – Single-Chip 5G Wi-Fi IEEE 802.11ac 2×2 MAC/ Baseband/Radio with Integrated Bluetooth 4.1 and FM Receiver

BCM4354 Data Sheet
DC Characteristics
Section 14: DC Characteristics
Note: Values in this data sheet are design goals and are subject to change based on the results of
device characterization.
Absolute Maximum Ratings
Caution! The absolute maximum ratings in Table 29 indicate levels where permanent damage to the
device can occur, even if these limits are exceeded for only a brief duration. Functional operation is
not guaranteed under these conditions. Operation at absolute maximum conditions for extended
periods can adversely affect long-term reliability of the device.
Table 29: Absolute Maximum Ratings
Rating
Symbol
Value
Unit
DC supply for VBAT and PA driver supply^a
VBAT
–0.5 to +6.0
V
DC supply voltage for digital I/O
DC supply voltage for RF switch I/Os
DC input supply voltage for CLDO and LNLDO
DC supply voltage for RF analog
DC supply voltage for core
WRF_TCXO_VDD
Maximum undershoot voltage for I/O^b
Maximum overshoot voltage for I/O^b
Maximum junction temperature
VDDIO
VDDIO_RF
–
VDDRF
VDDC
–
V_undershoot
V_overshoot
T_j
–0.5 to 3.9
V
–0.5 to 3.9
V
–0.5 to 1.575 V
–0.5 to 1.32
V
–0.5 to 1.32
V
–0.5 to 3.63
V
–0.5
V
VDDIO + 0.5 V
125
°C
a. The maximum continuous voltage is 5.25V. Voltage transients up to 6.0V for up to 10 seconds, cumulative
duration over the lifetime of the device, are allowed. Voltage transients as high as 5.5V for up to 250 seconds,
cumulative duration over the lifetime of the device, are allowed.
b. Duration not to exceed 25% of the duty cycle.
Broadcom^®
October 15, 2014 • 4354-DS109-R
BROADCOM CONFIDENTIAL
Page 125