W83793G Datasheet, PDF (87/131 Pages) Winbond – Winbond H/W Monitor

W83793G
Everytime W83793G PECI host detects user enable an agent by setting AgtEn, it start to Ping if the
client really exist. If not true, it set PECIAbsent flag to inform host; otherwise it continue to issue
GetTemp0 or GetTemp1 (when DM1Exist asserted). A three-level fault queue is made to ensure host
can get correct temperature and return.
8.12.2 PECI Register Details
8.12.2.1 Agent Configuration Register (AgtConfig)
This register commands PECI host to proceed related agents and domains, only agent or domain
specified in this register will proceed PECI transactions. It is reset as 00_HEX.
Location :
AgtConfig - Bank 0 Address D0_HEX
Type :
Read Write
Reset :
VSB5V(Pin 7) Rising,
VDD5V(Pin 25) Rising @ RST_VDD_MD(CR40.Bit4) set.
- 83 -
Publication Release Date: Dec. 11, 2006
Revision 1.0