W83793G Datasheet, PDF (77/131 Pages) Winbond – Winbond H/W Monitor

W83793G
FANSTOPTIME
BIT
7
6
5
4
3
2
1
0
Name
Reset
FanStopTime
64_HEX
BIT
DESCRIPTION
FanStopTime(Fan Stop time from Nonstop level to turn off).
7-0 Unit in 0.1sec. Ranged from 0.1sec to 25.5sec.
If set to 0, Fan will never stop.
8.11.2.16 Target Temperature of Temperature Inputs Register(TempTarget)
In Thermal Cruise mode, a target temperature is needed to be defined for each temperature
source. W83793G will try to tune fan speed to keep the temperature of target device around the target
temperature. Default target temperature for diode sensors is 40℃, and 32℃ for thermistor sensors.
Location :
TD1Target - Bank 2 Address 10_HEX
TD2Target - Bank 2 Address 11_HEX
TD3Target - Bank 2 Address 12_HEX
TD4Target - Bank 2 Address 13_HEX
TR1Target - Bank 2 Address 14_HEX
TR2Target - Bank 2 Address 15_HEX
Type : Read / Write
Reset :
VSB5V(Pin 7) Rising,
Init Reset(CR40.Bit7) is set,
VDD5V(Pin 25) Rising @ RST_VDD_MD(CR40.Bit4) set,
SYSRSTIN_N(Pin 15) Falling @ SYSRST_MD(CR40.Bit5) set.
TD1TARGET ~ TD4TARGET
BIT
7
6
5
4
3
2
1
0
Name Reserved
TempTarget
Reset
0
28_HEX
- 73 -
Publication Release Date: Dec. 11, 2006
Revision 1.0