W83793G Datasheet, PDF (105/131 Pages) Winbond – Winbond H/W Monitor

W83793G
Type: Read Only
Reset: None.
BIT
7
6
Name
Reset
0
0
RNG1~RNG4
5
4
3
2
1
0
Random Number Code
0
0
0
0
0
0
BIT
31-0 Random Number Code.
DESCRIPTION
8.13.2.10 ASF Assigned Address Register (ASFAddr)
After ARP host get related device UDID, it will start to assign each device for later usage. W83793G
will record this assigned address and set it as default address for ASF transactions. It is reset to 00_HEX.
Location: ASFAddr - Bank 1 Address 4F_HEX
Type: Read Only
Reset: VSB5V (Pin 7) Rising,
Init Reset (CR40.Bit7) is set,
BIT
7
6
Name
Reset
0
0
ASFADDR
5
4
3
2
1
0
ASF Address
0
0
0
0
0
0
BIT
DESCRIPTION
31-0 ASF Address. This register will be assigned while ARP AssignAddress command issued.
8.13.2.11 ASF Entity/Instance Registers (ENITIY/ENTINS)
W83793G supports various channels which can be reported to host through ASF protocol. Each
sensor channel is associated with an entity (or said location on motherboard) and entity instance.
Table provides an overall look for these registers.
Location:
VCA_ENTY - Bank 1 Address 50_HEX
VCB_ENTY - Bank 1 Address 51_HEX
Vtt_ENTY - Bank 1 Address 52_HEX
VDD_ENTY - Bank 1 Address 53_HEX
- 101 -
Publication Release Date: Dec. 11, 2006
Revision 1.0