W83793G Datasheet, PDF (64/131 Pages) Winbond – Winbond H/W Monitor

W83793G
Continued.
BIT
DESCRIPTION
F5OB(Fan output 5 Output Buffer Mode Control).
0: Depends on F5DC(CRB1.Bit4), if F5DC=1, Pin 50 output with DC mode. Otherwise
4
output is configured with OD mode.
1: Depends on F5DC(CRB1.Bit4), if F5DC=1, Pin 50 output with DC mode. Otherwise
output is configured with OB mode
F4OB(Fan output 4 Output Buffer Mode Control).
0: Depends on F4DC(CRB1.Bit3), if F4DC=1, Pin 49 output with DC mode. Otherwise
3
output is configured with OD mode.
1: Depends on F4DC(CRB1.Bit3), if F4DC=1, Pin 49 output with DC mode. Otherwise
output is configured with OB mode
F3OB(Fan output 3 Output Buffer Mode Control).
0: Depends on F3DC(CRB1.Bit2), if F3DC=1, Pin 46 output with DC mode. Otherwise
2
output is configured with OD mode.
1: Depends on F3DC(CRB1.Bit2), if F3DC=1, Pin 46 output with DC mode. Otherwise
output is configured with OB mode
F2OB(Fan output 2 Output Buffer Mode Control).
0: Depends on F2DC(CRB1.Bit1), if F2DC=1, Pin 44 output with DC mode. Otherwise
1
output is configured with OD mode.
1: Depends on F2DC(CRB1.Bit1), if F2DC=1, Pin 44 output with DC mode. Otherwise
output is configured with OB mode
F1OB(Fan output 1 Output Buffer Mode Control).
0: Depends on F1DC(CRB1.Bit0), if F1DC=1, Pin 42 output with DC mode. Otherwise
0
output is configured with OD mode.
1: Depends on F1DC(CRB1.Bit0), if F1DC=1, Pin 42 output with DC mode. Otherwise
output is configured with OB mode
BIT
Name
Reset
7
F8DC
0
6
F7DC
0
FANCTRL2
5
4
F6DC F5DC
0
0
3
F4DC
0
2
F3DC
0
1
F2DC
0
0
F1DC
0
BIT
DESCRIPTION
F8DC(Fan output 8 Direct Current Mode Control).
7 0: OD or OB mode on Pin 11. Depend on F8OB(CRB0.Bit7)
1: Pin 11 set as DC mode.
- 60 -