W83791G Datasheet, PDF (79/99 Pages) Winbond – Winbond H/W Monitoring IC

W83791D/G
Temperature: Get Event Data message, continued.
ASF PACKET DATA
TEMPERATURE 1
Entity ID
Temperature 1: 07h (System board)
Temperature 2/3: 03h (Processor)
These are defined in Table 28-11 of IPMI v1.0 specification. This value is
programmable because that may be used in add-in-card or connected to
other device.
Entity instance
Temperature 1: 01h (main system board).
Temperature 2: 01h (Processor 1)
Temperature 3: 02h (Processor 2)
These are programmable.
Event status index
Temperature 1: 0Dh (zero-based)
Temperature 2: 0Eh
Temperature 3: 0Fh
Event status
Status
Value
Status type
Description
Byte Count
0000_0010b Deasserted (send) Refer as above figure. 0Bh
0000_0011b Asserted (send) W83791D/G will respond 0Bh
all relative information.
0000_0111b Event Status End
When event status index 02h
is more than 10h, the
machine will be ended
the transmission.
The reference table of ASF 0.64 is shown as following.
Event Severity
Monitor (0x01): That is represented the monitored temperature is under the
lower temperature.
Non Critical (0x08): that is represented the temperature is located between
the lower and upper temperature.
Critical Condition (0x10): that is represented the monitored temperature is
over the upper temperature.
Upper Temp.
Lower Temp.
Critical Condition (0x10)
Non Critical (0x08)
Monitor (0x01)
- 73 -
Publication Release Date: April 14, 2006
Revision 1.1