W83791G Datasheet, PDF (38/99 Pages) Winbond – Winbond H/W Monitoring IC

W83791D/G
7.12 Entry Disable VID Output Control Register ⎯ Index 11h (Bank 0)
Power on default: 00h
BIT NAME
7:0 Entry_Dis
ATTRIBUTE
Write
DESCRIPTION
Entry Disable VID Output Control. When write a serial
pattern: 5Ah, 73h, B2h, E0h, the VID output control will enable.
If write a serial pattern: A5h, 4Ch, D9h, 8Ah, the VID output
control will disable.
7.13 VID Output Tolerance/Limit Register ⎯ Index 12h (Bank 0)
Power on default: 60h
BIT NAME ATTRIBUTE
7:5 VID_limit R/W
4:0 ^VID_PIN Read Only
DESCRIPTION
VID +/- Tolerance/Limit. Default is 3.
VID Pin Data Reading.
7.14 GPIO Control Register I ⎯ Index 13h (Bank 0)
Power on default: 00h
BIT NAME
7 GPIO7
6 GPIO6
5 GPIO5
4 GPIO4
3 GPIO3
2 GPIO2
1 GPIO1
0 GPIO0
ATTRIBUTE
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
DESCRIPTION
GPIO7 Control Bit. Set to 1, GPIO7 serves as output. Set to 0,
GPIO7 serves as input. Default is input.
GPIO6 Control Bit. Set to 1, GPIO6 serves as output. Set to 0,
GPIO6 serves as input. Default is input.
GPIO5 Control Bit. Set to 1, GPIO5 serves as output. Set to 0,
GPIO5 serves as input. Default is input.
GPIO4 Control Bit. Set to 1, GPIO4 serves as output. Set to 0,
GPIO4 serves as input. Default is input.
GPIO3 Control Bit. Set to 1, GPIO3 serves as output. Set to 0,
GPIO3 serves as input. Default is input.
GPIO2 Control Bit. Set to 1, GPIO2 serves as output. Set to 0,
GPIO2 serves as input. Default is input.
GPIO1 Control Bit. Set to 1, GPIO1 serves as output. Set to 0,
GPIO1 serves as input. Default is input.
GPIO0 Control Bit. Set to 1, GPIO0 serves as output. Set to 0,
GPIO0 serves as input. Default is input.
- 32 -
Publication Release Date: April 14, 2006
Revision 1.1