W83791G Datasheet, PDF (42/99 Pages) Winbond – Winbond H/W Monitoring IC

W83791D/G
7.21 Speech Control Register 2 ⎯ Index 1Eh (Bank 0)
Power on default: 00h
BIT
NAME
ATTRIBUTE
DESCRIPTION
7 Reserved
Reserved
Reserved
6 EN_VR1_SPK
R/W
Enable SPEECH output from VINR1 if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
5 EN_VR0_SPK
R/W
Enable SPEECH output from VINR0 if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
4 EN_CASO_SPK
R/W
Enable SPEECH output from case open if the signal has
gone high. Write 1, enable SPEECH output. Default 0.
3 EN_FAN3_SPK
R/W
Enable SPEECH output from FAN 3 if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
2 EN_NV5_SPK
R/W
Enable SPEECH output from -5V if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
1 EN_NV12_SPK
R/W
Enable SPEECH output from -12V if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
0 EN_V12_SPK
R/W
Enable SPEECH output from +12V if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
7.22 Speech Control Register 3 ⎯ Index 1Fh (Bank 0)
Power on default: 00h
BIT
NAME
ATTRIBUTE
DESCRIPTION
7
Dis_SLOC_SPK
R/W
Disable SPEECH output from SLOTOCC# if the CPU is
absent. Write 1, disable SPEECH output. Default 0.
6 Dis_ET5_SPK
R/W
Disable SPEECH output from EVNTRP5 if a transition occurs
at pin. Write 1, disable SPEECH output. Default 0.
5 Dis_ET4_SPK
R/W
Disable SPEECH output from EVNTRP4 if a transition occurs
at pin. Write 1, disable SPEECH output. Default 0.
4 Dis_ET3_SPK
R/W
Disable SPEECH output from EVNTRP3 if a transition occurs
at pin. Write 1, disable SPEECH output. Default 0.
3 Dis_ET2_SPK
R/W
Disable SPEECH output from EVNTRP2 if a transition occurs
at pin. Write 1, disable SPEECH output. Default 0.
2 Dis_ET1_SPK
R/W
Disable SPEECH output from EVNTRP1if a transition occurs
at pin. Write 1, disable SPEECH output. Default 0.
1 EN_VSB_SPK
R/W
Enable SPEECH output from VSB if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
0 EN_VBAT
_SPK
R/W
Enable SPEECH output from VBAT if the monitor value
exceeds the limit value. Write 1, enable SPEECH output.
Default 0.
- 36 -
Publication Release Date: April 14, 2006
Revision 1.1