W83791G Datasheet, PDF (45/99 Pages) Winbond – Winbond H/W Monitoring IC

W83791D/G
7.25 Interrupt Status Register 1 ⎯ Index 41h (Bank 0)
Power on default: 00h
BIT NAME ATTRIBUTE
DESCRIPTION
7 FAN2
Read Only
A one indicates the fan count limit of FAN2 has been exceeded.
6 FAN1
Read Only
A one indicates the fan count limit of FAN1 has been exceeded.
5 TEMP2 Read Only
A one indicates a high limit of VTIN2 has been exceeded from
temperature sensor 2.
4 TEMP1 Read Only
A one indicates a high limit of VTIN1 has been exceeded from
temperature sensor 1.
3 5VDD
Read Only
A one indicates a high or low limit of power 5VDD has been
exceeded.
2 +3.3VIN Read Only A one indicates a high or low limit of +3.3VIN has been
exceeded.
1 VINR0 Read Only A one indicates a high or low limit of VINR0 has been exceeded.
0 Vcore Read Only A one indicates a high or low limit of Vcore has been exceeded.
7.26 Interrupt Status Register 2 ⎯ Index 42h (Bank 0)
Power on default: 00h
BIT NAME ATTRIBUTE
DESCRIPTION
7 Reserved
Reserved
6 VINR1
Read Only ^{A one indicates a high or low limit of VINR1 (pin33) has been}
exceeded.
5 TEMP3
Read Only A one indicates a high or low limit of VTIN3 has been exceeded
from temperature sensor 3.
4 Chassis Read Only A one indicates Chassis Intrusion has gone high.
Intrusion
3 FAN3
Read Only A one indicates the fan count limit of FAN3 has been exceeded.
2 -5VIN
Read Only A one indicates a high or low limit of -5VIN has been exceeded.
1 -12VIN
Read Only A one indicates a high or low limit of -12VIN has been exceeded.
0 +12VIN Read Only A one indicates a high or low limit of +12VIN has been exceeded.
Note: Interrupt status register III is defined at index 9Bh
- 39 -
Publication Release Date: April 14, 2006
Revision 1.1