W83977F-A Datasheet, PDF (150/182 Pages) Winbond – WINBOND I/O

W83977F-A/ W83977G-A/ W83977AF-A/ W83977AG-A
Bit 2 : Int En
= 1 Enable Common IRQ
= 0 Disable Common IRQ
Bit 1 : Polarity : 1 : Invert, 0 : No Invert
Bit 0 : In/Out : 1 : Input, 0 : Output
CRED (GP25, Default 0x01)
Bit 7-4 : Reserved.
Bit 3 : Select Function.
= 1 Select alternate function: GATE A20(Connect to KBC P21).
= 0 Select basic I/O function
Bit 2 : Int En
= 1 Enable Common IRQ
= 0 Disable Common IRQ
Bit 1 : Polarity : 1 : Invert, 0 : No Invert
Bit 0 : In/Out : 1 : Input, 0 : Output
CRF0 (Default 0x00)
Debounce Filter Enable or Disable for General Purpose I/O Combined Interrupt. The Debounce Filter
can reject a pulse with 1ms width or less.
Bit 7-4 : Reserved
Bit 3 : GP Common IRQ Filter Select
= 1 Debounce Filter Enabled
= 0 Debounce Filter Bypassed
Bit 2-0 : Reserved
CRF1 (Reserved)
CRF2 (Default 0x00)
Watching Dog Timer Time-out value. Writing a non-zero value to this register causes the counter to
load the value to Watching Dog Counter and start to count down. If the Bit2 and Bit 1 are set, any
Mouse Interrupt or Keyboard Interrupt happen will also cause to reload the non-zero value to
Watching Dog Counter and count down. Read this register can not access Watching Dog Timer
Time-out value, but can access the current value in Watching Dog Counter.
Bit 7-0 :
= 0x00 Time-out Disable
= 0x01 Time-out occurs after 1 minute
= 0x02 Time-out occurs after 2 minutes
= 0x03 Time-out occurs after 3 minutes
................................................
= 0xFF Time-out occurs after 255 minutes
CRF3 (WDT_CTRL0, Default 0x00)
Watching Dog Timer Control Register #0
Bit 7-4 : Reserved
-142