W83977F-A Datasheet, PDF (143/182 Pages) Winbond – WINBOND I/O

W83977F-A/ W83977G-A/ W83977AF-A/ W83977AG-A
CR74 (Default 0x04)
Bit 7-3 : Reserved.
Bit 2-0 : These bits select DRQ resource for RX of UART C.
= 0x00 DMA0
= 0x01 DMA1
= 0x02 DMA2
= 0x03 DMA3
= 0x04-0x07 No DMA active
CR75 (Default 0x04)
Bit 7-3 : Reserved.
Bit 2-0 : These bits select DRQ resource for TX of UART C.
= 0x00 DMA0
= 0x01 DMA1
= 0x02 DMA2
= 0x03 DMA3
= 0x04-0x07 No DMA active
CRF0 (Default 0x00)
Bit 7-4 : Reserved.
Bit 3 : RXW4C
= 0 No reception delay when SIR is changed from TX mode to RX mode.
= 1 Reception delays 4 characters-time(40 bit-time) when SIR is changed from TX mode
to RX mode.
Bit 2 : TXW4C
= 0 No transmission delay when SIR is changed from RX mode to TX mode.
= 1 Transmission delays 4 characters-time(40 bit-time) when SIR is changed from RX
mode to TX mode.
Bit 1 : APEDCRC
= 0 No append hardware CRC value as data in FIR/MIR mode.
= 1 Append hardware CRC value as data in FIR/MIR mode.
Bit 0 : ENBNKSEL; Bank select enable
= 0 Disable IR Bank selection.
= 1 Enable IR Bank selection.
-135 -
Publication Release Date: May 2006
Revision 0.60