LM3S6C11 Datasheet, PDF (752/828 Pages) Texas Instruments – Stellaris® LM3S6C11 Microcontroller

Signal Tables
OBSOLETE: TI has discontinued production of this device.
Table 18-6. Possible Pin Assignments for Alternate Functions (continued)
# of Possible Assignments
two
three
four
five
six
seven
eight
Alternate Function
SSI1Clk
SSI1Fss
C1o
I2C1SCL
I2C1SDA
C0o
CCP6
CCP7
U2Rx
U2Tx
CCP4
CCP5
U1Rx
U1Tx
CCP0
CCP1
CCP2
CCP3
GPIO Function
PE0 PF2
PE1 PF3
PC5 PC7 PE6
PA0 PA6 PG0
PA1 PA7 PG1
PB5 PB6 PC5 PD7
PB5 PD0 PD2 PE1
PB6 PD1 PD3 PE3
PB4 PD0 PD5 PG0
PD1 PD6 PE4 PG1
PA7 PC4 PC7 PD5 PE2
PB5 PB6 PC4 PD2 PE5
PA0 PB0 PB4 PC6 PD0 PD2
PA1 PB1 PB5 PC7 PD1 PD3
PB0 PB2 PB5 PC6 PC7 PD3 PD4
PA6 PB1 PB6 PC4 PC5 PD7 PE3
PB1 PB5 PC4 PD1 PD5 PE1 PE2 PE4
PA7 PB2 PC5 PC6 PD4 PE0 PE4 PF1
18.2 108-Ball BGA Package Pin Tables
18.2.1 Signals by Pin Number
Table 18-7. Signals by Pin Number
Pin Number
A1
A2
A3
Pin Name
PE6
C1o
PD7
C0o
CCP1
PD6
U2Tx
Pin Type
I/O
O
I/O
O
I/O
I/O
O
PD4
I/O
A4
CCP0
I/O
CCP3
I/O
GNDA
-
A5
Buffer Type^a Description
TTL
GPIO port E bit 6.
TTL
Analog comparator 1 output.
TTL
GPIO port D bit 7.
TTL
Analog comparator 0 output.
TTL
Capture/Compare/PWM 1.
TTL
GPIO port D bit 6.
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
TTL
GPIO port D bit 4.
TTL
Capture/Compare/PWM 0.
TTL
Capture/Compare/PWM 3.
Power
The ground reference for the analog circuits ( Analog Comparators,
etc.). These are separated from GND to minimize the electrical
noise contained on VDD from affecting the analog functions.
752
July 24, 2012
Texas Instruments-Production Data