English
Language : 

LM3S6C11 Datasheet, PDF (396/828 Pages) Texas Instruments – Stellaris® LM3S6C11 Microcontroller
OBSOLETE: TI has discontinued production of this device.
General-Purpose Input/Outputs (GPIOs)
9.2 Functional Description
Each GPIO port is a separate hardware instantiation of the same physical block (see Figure
9-1 on page 396 and Figure 9-2 on page 397). The LM3S6C11 microcontroller contains seven ports
and thus seven of these physical GPIO blocks. Note that not all pins may be implemented on every
block. Some GPIO pins can function as I/O signals for the on-chip peripheral modules. For information
on which GPIO pins are used for alternate hardware functions, refer to Table 18-5 on page 750.
Figure 9-1. Digital I/O Pads
Port
Control
GPIOPCTL
Commit
Control
GPIOLOCK
GPIOCR
Mode
Control
GPIOAFSEL
Periph 0
Periph 1
Periph n
Alternate Input
Alternate Output
Alternate Output Enable
Data
Control
GPIODATA
GPIODIR
GPIO Input
GPIO Output
GPIO Output Enable
Pad Input
Pad Output
Pad Output
Enable
Digital
I/O
Pad
Package I/O Pin
Interrupt
Interrupt
Control
GPIOIS
GPIOIBE
GPIOIEV
GPIOIM
GPIORIS
GPIOMIS
GPIOICR
Pad
Control
GPIODR2R
GPIODR4R
GPIODR8R
GPIOSLR
GPIOPUR
GPIOPDR
GPIOODR
GPIODEN
Identification Registers
GPIOPeriphID0
GPIOPeriphID1
GPIOPeriphID2
GPIOPeriphID3
GPIOPeriphID4
GPIOPeriphID5
GPIOPeriphID6
GPIOPeriphID7
GPIOPCellID0
GPIOPCellID1
GPIOPCellID2
GPIOPCellID3
396
July 24, 2012
Texas Instruments-Production Data