LM3S6C11 Datasheet, PDF (467/828 Pages) Texas Instruments – Stellaris® LM3S6C11 Microcontroller

OBSOLETE: TI has discontinued production of this device.
Stellaris^® LM3S6C11 Microcontroller
Bit/Field
9
8
7
6
5
4
Name
TBSTALL
TBEN
reserved
TAPWML
reserved
RTCEN
Type
R/W
R/W
RO
R/W
RO
R/W
Reset
0
0
Description
GPTM Timer B Stall Enable
The TBSTALL values are defined as follows:
Value Description
0 Timer B continues counting while the processor is halted by the
debugger.
1 Timer B freezes counting while the processor is halted by the
debugger.
If the processor is executing normally, the TBSTALL bit is ignored.
GPTM Timer B Enable
The TBEN values are defined as follows:
Value Description
0 Timer B is disabled.
1 Timer B is enabled and begins counting or the capture logic is
enabled based on the GPTMCFG register.
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
GPTM Timer A PWM Output Level
The TAPWML values are defined as follows:
Value Description
0 Output is unaffected.
1 Output is inverted.
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
GPTM RTC Stall Enable
The RTCEN values are defined as follows:
Value Description
0 RTC counting freezes while the processor is halted by the
debugger.
1 RTC counting continues while the processor is halted by the
debugger.
If the RTCEN bit is set, it prevents the timer from stalling in all operating
modes, even if TnSTALL is set.
July 24, 2012
467
Texas Instruments-Production Data