LM3S6C11 Datasheet, PDF (738/828 Pages) Texas Instruments – Stellaris® LM3S6C11 Microcontroller

Signal Tables
OBSOLETE: TI has discontinued production of this device.
Table 18-2. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PC3
I/O
TTL
GPIO port C bit 3.
77
SWO
O
TTL
JTAG TDO and SWO.
TDO
O
TTL
JTAG TDO and SWO.
PC2
I/O
TTL
GPIO port C bit 2.
78
TDI
I
TTL
JTAG TDI.
PC1
I/O
TTL
GPIO port C bit 1.
79
SWDIO
I/O
TTL
JTAG TMS and SWDIO.
TMS
I
TTL
JTAG TMS and SWDIO.
PC0
I/O
TTL
GPIO port C bit 0.
80
SWCLK
I
TTL
JTAG/SWD CLK.
TCK
I
TTL
JTAG/SWD CLK.
81
VDD
-
Power Positive supply for I/O and some logic.
82
GND
-
Power Ground reference for logic and I/O pins.
83
VDD
-
Power Positive supply for I/O and some logic.
84
VDD
-
Power Positive supply for I/O and some logic.
85
GND
-
Power Ground reference for logic and I/O pins.
86
GND
-
Power Ground reference for logic and I/O pins.
87
GND
-
Power Ground reference for logic and I/O pins.
VDDC
88
-
Power Positive supply for most of the logic function, including the
processor core and most peripherals. The voltage on this pin is
1.3 V and is supplied by the on-chip LDO. The VDDC pins should
only be connected to the LDO pin and an external capacitor as
specified in Table 20-6 on page 780 .
PB7
I/O
TTL
GPIO port B bit 7.
89
NMI
I
TTL
Non-maskable interrupt.
PB6
I/O
TTL
GPIO port B bit 6.
C0+
I
Analog Analog comparator 0 positive input.
C0o
O
TTL
Analog comparator 0 output.
90
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
PB5
I/O
TTL
GPIO port B bit 5.
C0o
O
TTL
Analog comparator 0 output.
C1-
I
Analog Analog comparator 1 negative input.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
91
CCP2
I/O
TTL
Capture/Compare/PWM 2.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP6
I/O
TTL
Capture/Compare/PWM 6.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
738
July 24, 2012
Texas Instruments-Production Data