CC2510FX Datasheet, PDF (8/244 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

C2510Fx / CC2511Fx
4 Absolute Maximum Ratings
Under no circumstances must the absolute maximum ratings given in Table 2 be violated. Stress
exceeding one or more of the limiting values may cause permanent damage to the device.
Parameter
Supply voltage (VDD)
Voltage on any digital pin
Voltage on the pins RF_P, RF_N
and DCOUPL
Voltage ramp-up rate
Input RF level
Storage temperature range
Solder reflow temperature
ESD CC2510Fx
ESD CC2510Fx
ESD CC2511x
ESD CC2511x
Min
Max
Units Condition
-0.3
3.9
V All supply pins must have the same voltage
-0.3 VDD + 0.3, V
max 3.9
-0.3
2.0
V
120
kV/µs
+10
dBm
-50
150
°C Device not programmed
260
°C According to IPC/JEDEC J-STD-020D
750
V According to JEDEC STD 22, method A114, Human
Body Model (HBM)
500
V According to JEDEC STD 22, C101C, Charged Device
Model (CDM)
750
V According to JEDEC STD 22, method A114, Human
Body Model (HBM)
500
V According to JEDEC STD 22, C101C, Charged Device
Model (CDM)
Table 2: Absolute Maximum Ratings
Caution! ESD sensitive device.
Precaution should be used when handling
the device in order to prevent permanent
damage.
5 Operating Conditions
5.1 CC2510Fx Operating Conditions
The operating conditions for CC2510Fx are listed in Table 3 below.
Parameter
Min
Max
Operating ambient temperature, T_A -40
85
Operating supply voltage (VDD)
2.0
3.6
Unit Condition
°C
V All supply pins must have the same voltage
Table 3: Operating Conditions for CC2510Fx
5.2 CC2511Fx Operating Conditions
The operating conditions for CC2511Fx are listed in Table 4 below.
Parameter
Min
Max
Operating ambient temperature, T_A 0
85
Operating supply voltage (VDD)
3.0
3.6
Unit Condition
°C
V All supply pins must have the same voltage
Table 4: Operating Conditions for CC2511Fx
SWRS055D
Page 8 of 243