CC2510FX Datasheet, PDF (24/244 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

C2510Fx / CC2511Fx
Figure 6: Debug Interface AC Characteristics
7.14 Port Outputs AC Characteristics
T_A = 25 °C, VDD = 3.0 V if nothing else stated. All measurement results are obtained using the
CC2510EM reference designs ([1]).
Parameter
Min
Typ
Max Unit Condition/Note
P0_[0:7], P1_[2:7],
P2_[0:4] Port output
rise time
(PICTL.PADSC=0 /
PICTL.PADSC=1)
P0_[0:7], P1_[2:7],
P2_[0:4] Port output
fall time
(PICTL.PADSC=0 /
PICTL.PADSC=1)
3.15 /
1.34
3.2 / 1.44
ns Load = 10 pF
Timing is with respect to 10% VDD and 90% VDD levels.
Values are estimated
ns Load = 10 pF
Timing is with respect to 90% VDD and 10% VDD.
Values are estimated
Table 22: Port Outputs AC Characteristics
7.15 Timer Inputs AC Characteristics
T_A = 25 °C, VDD = 3.0 V if nothing else stated. All measurement results are obtained using the
CC2510EM reference designs ([1]).
Parameter
Min
Typ
Max
Unit Condition/Note
Input capture
pulse width
t_SYSCLK
Synchronizers determine the shortest input pulse that can be
recognized. The synchronizers operate from the current
system clock rate (see Table 19)
Table 23: Timer Inputs AC Characteristics
7.16 DC Characteristics
The DC Characteristics of CC2510Fx/CC2511Fx are listed in Table 24 below.
T_A = 25 °C, VDD = 3.0 V if nothing else stated. All measurement results are obtained using the
CC2510EM reference designs ([1]).
Digital Inputs/Outputs
Min
Typ
Max Unit Condition
SWRS055D
Page 24 of 243