CC2510FX Datasheet, PDF (122/244 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

C2510Fx / CC2511Fx
T1CCTL2 (0xE7) – Timer 1 Channel 2 Capture/Compare Control
Bit Name
7
CPSEL
6
IM
5:3 CMP[2:0]
2
MODE
1:0 CAP[1:0]
Reset R/W
0
R/W
1
R/W
000
R/W
0
R/W
00
R/W
Description
Timer 1 channel 2 capture select
0
Use normal capture input
1
Use RF event(s) enabled in the RFIM register to trigger a capture
Channel 2 interrupt mask
0
Interrupt disabled
1
Interrupt enabled
Channel 2 compare mode select. Selects action on output when timer value
equals compare value in T1CC2
000 Set output on compare
001 Clear output on compare
010 Toggle output on compare
011 Set output on compare-up, clear on 0 (clear on compare-down in
up/down mode)
100 Clear output on compare-up, set on 0 (set on compare-down in
up/down mode)
101 Set when equal to T1CC2, clear when equal to T1CC0
110 Clear when equal to T1CC2, set when equal to T1CC0
111 Not used
Mode. Select Timer 1 channel 2 capture or compare mode
0
Capture mode
1
Compare mode
Channel 2 capture mode select
00 No capture
01 Capture on rising edge
10 Capture on falling edge
11 Capture on both edges
T1CC2H (0xDF) – Timer 1 Channel 2 Capture/Compare Value High
Bit Name
7:0 T1CC2[15:8]
Reset R/W
0x00 R/W
Description
Timer 1 channel 2 capture/compare value, high order byte
T1CC2L (0xDE) – Timer 1 Channel 2 Capture/Compare Value Low
Bit Name
7:0 T1CC2[7:0]
Reset R/W
0x00 R/W
Description
Timer 1 channel 2 capture/compare value, low order byte
SWRS055D
Page 122 of 243