CC2510FX Datasheet, PDF (145/244 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

C2510Fx / CC2511Fx
ADCCON3 (0xB6) – ADC Control 3
Bit Name
7:6 EREF[1:0]
5:4 EDIV[1:0]
3:0 ECH[3:0]
Reset R/W
00
R/W
00
R/W
0000 R/W
Description
Selects reference voltage used for the extra conversion
00
Internal 1.25V reference
01
External reference on AIN7 pin (only CC2510Fx)
10
AVDD pin
11
External reference on AIN6-AIN7 differential input (only CC2510Fx)
Sets the decimation rate used for the extra conversion. The decimation rate
also determines the resolution and time required to complete the conversion.
00
64 dec rate (7 bits resolution)
01
128 dec rate (9 bits resolution)
10
256 dec rate (10 bits resolution)
11
512 dec rate (12 bits resolution)
Extra channel select. An extra conversion will be triggered by writing to these
bits. If they are written while the ADC is running, the conversion will take
place as soon as the sequence has completed. If the bits are written while
the ADC is not running, the conversion will take place immediately after this
register has been updated.
The bits are automatically cleared when the extra conversion has finished.
0000 AIN0
0001 AIN1
0010 AIN2
0011 AIN3
0100 AIN4
0101 AIN5
0110 AIN6
0111 AIN7
1000 AIN0-AIN1
1001 AIN2-AIN3
1010 AIN4-AIN5
1011 AIN6-AIN7
1100 GND
1101 Positive voltage reference
1110 Temperature sensor
1111 VDD/3
SWRS055D
Page 145 of 243