LSM6DB0 Datasheet, PDF (37/66 Pages) STMicroelectronics – 3D accelerometer, 3D gyroscope and signal processor

LSM6DB0
9
Absolute maximum ratings
Absolute maximum ratings
9.1
Note:
Accelerometer and gyroscope
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 15. Absolute maximum ratings
Symbol
Ratings
Maximum value
Unit
VDD Supply voltage
-0.3 to 4.8
V
T_STG Storage temperature range
Sg Acceleration g for 0.1 ms
-40 to +125
°C
10,000
g
ESD Electrostatic discharge protection (HBM)
2
kV
Input voltage on any control pin
Vin
0.3 to Vdd_IO +0.3
V
(including CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
Supply voltage on any pin should never exceed 4.8 V
This device is sensitive to mechanical shock, improper handling can cause
permanent damage to the part.
This device is sensitive to electrostatic discharge (ESD), improper handling can
cause permanent damage to the part.
9.2
Microprocessor
Absolute maximum ratings are those values above which damage to the device may occur.
Functional operation under these conditions is not implied. All voltages are in reference to
GND.
Table 16. Absolute maximum ratings for microprocessor
Pin
Parameter
Value
(min to max)
Unit
13
9, 10, 11, 15, 16
2, 3, 4, 6, 7, 8
5
7, 8
T_STG
V_ESD-_HBM
DC voltage on linear voltage regulator
DC voltage on digital output pins
DC voltage on analog pins
DC voltage on RF/XTAL pins
Storage temperature range
Electrostatic discharge voltage
-0.3 to +1.8
-0.3 to +3.6
-0.3 to +1.8 V
-0.3 to +1.8
-0.3 to +1.8
-40 to +125 °C
±2.0
kV
DocID025603 Rev 1
37/66
66