LSM6DB0 Datasheet, PDF (13/66 Pages) STMicroelectronics – 3D accelerometer, 3D gyroscope and signal processor

LSM6DB0
Block diagrams and pin description
Table 2. Pin description (continued)
Pin#
Name
Function
I/O level
15
DIO10
GPIO10 / spi_input
VDD
16
DIO9
GPIO9 / SPI_CS
VDD
17
RES
Connect to GND
18
RES
Connect to GND
19
RES
Connect to VDD
20
CAP
Connect to GND with ceramic capacitor⁽²⁾
21
RES
Leave unconnected
22
RES
Leave unconnected
1. Recommended 100 nF filter capacitor.
2. 10 nF (±10%), 16 V. 1 nF minimum value has to be guaranteed under 12 V bias condition.
The INT1 and INT2 pins of the motion sensor are internally connected to the DIO12 and
DIO11 pins of the microcontroller, refer to Figure 1.
DocID025603 Rev 1
13/66
66