SAB80515 Datasheet, PDF (2/270 Pages) Siemens Semiconductor Group – 8-Bit Single-Chip Microcontroller Family

SAB 80515 / SAB 80C515 Family
Revision History: 8.95
Previous Releases: 12.90/10.92
Page
Subjects (changes since last revision)
30
Modified timing diagram (PSEN rising edge)
39
More detailed description of ACMOS port structure
80
Differential output impedance of analog reference supply voltage now: 1 kΩ
105
Second paragraph: additional description; WDT reset information added
106
SWDT reset information added
109
Figure 7-51 corrected
137
Encoding of ADD A, direct corrected
152
Encoding of CPL bit corrected
243
New release of SAB 80C515 / SAB 80C535 data sheet inserted
301
New release of SAB 80515 / SAB 80535 data sheet inserted
Edition 08.95
Published by Siemens AG,
Bereich Halbleiter, Marketing-
Kommunikation, Balanstraße 73,
81541 München
© Siemens AG 1995.
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes
and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies
and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact
your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will
take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs in-
curred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components¹ of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems² with the express
written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the
failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain hu-
man life. If they fail, it is reasonable to assume that the health of the user may be endangered.