K4J55323QG Datasheet, PDF (12/53 Pages) Samsung semiconductor – 256Mbit GDDR3 SDRAM

K4J55323QG
256M GDDR3 SDRAM
WRITE LATENCY
The Write latency (WL) is the delay, in clock cycles, between the registration of a WRITE command and the availability of the first bit of
input data. The latency can be set from 1 to 7 clocks depending in the operating frequency and desired current draw. When the write
latencies are set to 1 or 2 or 3 clocks, the input receivers never turn off when the WRITE command is registered. If a WRITE command
is registered at clock edge n, and the latency is m clocks, the data will be available nominally coincident with clock edge n+m. Reserved
states should not be used as unknown operation or incompatibility with future versions may result.
/CK
CK
COMMAND
WDQS
T0
WRITE
T1
T2
NOP
WL = 3
NOP
T3
T3n
NOP
DQ
/CK
CK
COMMAND
WDQS
DQ
T0
WRITE
T2
T3
NOP
WL = 4
NOP
T4
T4n
NOP
Burst Length = 4 in the cases shown
DON’T CARE
TRANSITIONING DATA
12 of 53
Rev. 1.1 November 2005