RX64M_15 Datasheet, PDF (209/230 Pages) Renesas Technology Corp – Renesas MCUs

RX64M Group
5. Electrical Characteristics
Table 5.46 12-Bit A/D (Unit 1) Conversion Characteristics
Conditions: VCC = AVCC0 = AVCC1 = VCC_USB = V_BATT = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V
, PCLKB = PCLKD = 1 MHz to 60 MHz, T_a = T_opr
Item
Min.
Typ.
Resolution
8
—
Conversion time*¹
Permissible signal source
0.88
—
(Operation at PCLK = impedance (max.) = 1.0 kΩ (0.667)
60 MHz)
*²
Analog input capacitance
—
—
Offset error
—
±2.0
Full-scale error
—
±2.0
Quantization error
—
±0.5
Absolute accuracy
—
±4.0
DNL differential nonlinearity error
—
±1.5
INL integral nonlinearity error
—
±2.0
Max.
12
—
30
±3.5
±3.5
—
±6.0
±2.5
±3.5
Unit
Test Conditions
Bit
μs
Sampling in 40 states
pF
LSB
LSB
LSB
LSB
LSB
LSB
Note:
Note 1.
Note 2.
The above specification values apply when there is no access to the external bus during A/D conversion. If access proceeds
during A/D conversion, values may not fall within the above ranges.
The conversion time includes the sampling time and the comparison time. As the test conditions, the number of sampling states
is indicated.
The value in parentheses indicates the sampling time.
Table 5.47 A/D Internal Reference Voltage Characteristics
Conditions: VCC = AVCC0 = AVCC1 = VCC_USB = V_BATT = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V,
PCLKB = PCLKD = 60 MHz, T_a = T_opr
Item
A/D internal reference voltage
Min.
Typ.
Max.
Unit
Test
Conditions
1.20
1.25
1.30
V
R01DS0173EJ0100 Rev.1.00
Jul 31, 2014
Page 209 of 230