RX64M_15 Datasheet, PDF (147/230 Pages) Renesas Technology Corp – Renesas MCUs

RX64M Group
5. Electrical Characteristics
Table 5.5 DC Characteristics (4)
Conditions: VCC = AVCC0 = AVCC1 = VREFH0 = VCC_USB = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V,
T_a = T_opr
Item
Symbol Min.
Analog power During 12-bit A/D conversion (unit 0)
AI_CC
—
supply current*¹ _{During 12-bit A/D conversion (unit 0) with the}
—
channel-dedicated sample-and-hold circuits
for 3 channels operating
During 12-bit A/D conversion (unit 1)
—
During 12-bit A/D conversion (unit 1) with the
—
temperature sensor operating
During D/A conversion Without AMP output
—
(per unit)
With AMP output
—
Waiting for A/D, D/A, or temperature sensor
—
conversion (all units)
A/D, D/A converter, temperature sensor in
—
standby mode (all units)
Reference
During 12-bit A/D conversion (unit 0)
AI_REFH
—
power supply
current
Waiting for 12-bit A/D conversion (unit 0)
—
12-bit A/D converter in standby mode (unit 0)
—
USB operating Low speed
current
USB0
USBA
I_CCUSBLS
—
—
USBA
—
Full speed
USB0
USBA
I_CCUSBFS
—
—
USBA
—
Standby mode
(direct power down)
RAM standby voltage
VCC rising gradient
VCC falling gradient*²
USBA
I_CCUSBSBY —
V_RAM
2.7
SrVCC 8.4
SfVCC 8.4
Typ. Max. Unit
Test Conditions
0.7 1.0 mA IAVCC0_AD
1.7 2.5 mA IAVCC0_AD+SH
0.6 1.0 mA IAVCC1_AD
0.7 1.1 mA IAVCC1_AD+TEMP
0.24 0.4
0.4 0.7
0.9 1.4
mA IAVCC1_DA
mA
mA IAVCC0 + IAVCC1
1.3 3.0 μA IAVCC0 + IAVCC1
70 120 μA IVREFH0
0.07 0.4 μA IVREFH0
0.07 0.2 μA IVREFH0
3.5 6.5 mA VCC_USB
8.5 12.0 mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 0)
2.8 3.6 mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 1)
4.0 10.0 mA VCC_USB
12.0 20.0
mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 0)
6.5 13.0 mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 1)
0.1 3.0 μA VCC_USBA =
AVCC_USBA
—
—
V
— 20000 μs/V
—
— μs/V
Note 1. The reference power supply current is included in the power supply current value for 12-bit A/D conversion (unit 1) and D/A
conversion.
Note 2. This applies when V_BATT is used.
R01DS0173EJ0100 Rev.1.00
Jul 31, 2014
Page 147 of 230