M306H2MC-XXXFP Datasheet, PDF (187/210 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306H2MC-XXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
with DATA ACQUISITION CONTROLLER
Tabl 4.2 Recommended operating conditions (referenced to VCC = 4.75V to 5.25V at Ta = – 20 to
70^oC unless otherwise specified)
Symbol
Parameter
Vcc
AVcc
Vss
AVss
VIH
Supply voltage
Analog supply voltage
Supply voltage
Analog supply voltage
HIGH input P70 to P77, P80 to P87, P90 to P97, P100 to P107, P31 to P37,
voltage
P40 to P47, P50 to P57, P60 to P67,
XIN, RESET, CNVSS, BYTE, M1, M2
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
Min
4.75
Standard
Typ.
5.0
Vcc
0
0
Max.
5.25
0.8Vcc
Vcc
0.8Vcc
Vcc
P00 to P07, P10 to P17, P20 to P27, P30
0.5Vcc
Vcc
(data input function during memory expansion and microprocessor modes)
LOW input ^{P70 to P77, P80 to P87, P90 to P97, P100 to P107, P31to P37,}
voltage
P40 to P47, P50 to P57, P60 to P67,
0
VIL
XIN, RESET, CNVSS, BYTE, M1, M2
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
0
P00 to P07, P10 to P17, P20 to P27, P30
0
(data input function during memory expansion and microprocessor modes)
0.2Vcc
0.2Vcc
0.16Vcc
VCVIN ^{Composite video input voltage}
CVIN, SYNCIN
VFSCIN Input voltage
FSCIN(Note 1)
HIGH peak output
I OH (peak) current
(Note 2.3)
HIGH average output
I OH (avg) current
P00to P07, P10 to P17,P20 to P27, P30 to P37,
P40 to P47, P50 to P57,P60 to P67, P72 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107,
P11
P00 to P07, P10 to P17,P20 to P27,P30 to P37,
P40 to P47, P50 to P57,P60 to P67,P72 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107,
P11
LOW peak output
I OL (peak) _current
P00 to P07, P10 to P17,P20 to P27,P30 to P37,
P40 to P47, P50 to P57, P60 to P67,P70 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107,
P11
LOW average
I OL (avg) _{output current}
P00 to P07, P10 to P17,P20 to P27,P30 to P37,
P40 to P47, P50 to P57,P60 to P67,P70 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107,
P11,
0.3V P-P
2V P-P
4.0V P-P
-10.0
-5.0
10.0
5.0
f (XIN) ^{Main clock input}
No wait
Vcc=4.75V to 5.25V
0
10
oscillation frequency
with wait
f (XcIN) _{Subclock oscillation frequency}
Vcc=2.80V to 5.25V (see note 4)
32.768
50
f (FSCIN) Oscillation frequency for synchronous signal(Duty 40% to 60%)
4.434
Unit
V
V
V
V
V
V
V
V
V
V
V
V
mA
mA
mA
mA
MHz
kHz
MHz
Note 1: Noise component is within 30mV.
Note 2: The mean output current is the mean value within 100ms.
Note 3: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOH
(peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOL (peak) for
ports P3, P4, P5, P6, P7, and P80 to P84 must be 80mA max. The total IOH (peak) for ports P3,
P4, P5, P6, P72 to P77, and P80 to P84 must be 80mA max.
Note 4: Use the low power dissipation mode.
Rev. 1.0
186