M306H2MC-XXXFP Datasheet, PDF (158/210 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306H2MC-XXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
with DATA ACQUISITION CONTROLLER
(14) Address 1516 ( = DA5 to 0)
DD15
00
DD8DD7
000 00 00
DD0
000
Bit symbol
Reserved bit
Bit name
Function
Must always be set to "0".
Synchronous clock oscillation 0 Synchronizing clock OFF
XTAL_VCO
selection bit
1 Synchronizing clock oscillation
Reserved bit
Must always be set to "0".
PDC clock oscillation
PDC_VCO_ON
selection bit
0 _{PDC clock OFF}
1 _{PDC clock oscillation}
Reserved bit
Must always be set to "0".
VPS and VBI clock oscillation 0 VPS and VBI clock OFF
VPS_VCO_ON
selection bit
1 VPS and VBI clock oscillation
Reserved bit
Must always be set to "0".
STBY1
Stand-by mode selection bit ^{0 Normal mode}
1 Stand-by mode.
Reserved bit
Must always be set to "0".
RW
✕
✕
✕
✕
✕
(15) Address 1616 ( = DA5 to 0)
DD15
DD8DD7
DD0
00000
0
Bit symbol
PDC_HP3
PDC_HP4
PDC_HP5
Bit name
PDC acquisition check start
position selection bit
Function
RW
If the PDC acquisition check start
position is PDC_HS,
10
PDC_HS= T3 ✕ ∑2^(n-3)PDC_HPn
n=3
T3 : PDC clock run-in cycle ÷2
PDC_HP6
PDC_HP7
PDC_HP8
PDC_HP9
PDC_HP10
Set to flaming code check start
position
Set by the 144ns (1bit)
Reserved bit
Must always be set to "0".
✕
PD1
PD2
PDC, VPS, VBI clock phase
control bit
Adjust clock phase for Data slicer.
Normaly, PD2 to PD1=(10)2 fixed.
Reserved bit
Must always be set to "0".
✕
Rev. 1.0
157