M306H2MC-XXXFP Datasheet, PDF (156/210 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306H2MC-XXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
with DATA ACQUISITION CONTROLLER
(9) Address 0F16 ( = DA5 to 0)
DD15
DD8DD7
0000000 00
DD0
00000
Bit symbol
Reserved bit
Bit name
Function
Must always be set to "0".
RW
✕
SEL_PDCH PDC clock selection bit
Reserved bit
0 Do not set
1
Generats PDC clock in based on FSCIN pin
input signal.
Must always be set to "0".
✕
ADON
0 Data acquisition OFF
Data acquisition control bit
1 Data acquisition ON
Reserved bit
Must always be set to "0".
✕
(10) Address 1016 ( = DA5 to 0)
DD15
00000
DD8DD7
00
DD0
01 0
Bit symbol
Reserved bit
Bit name
Function
Must always be set to "0".
RW
✕
Flaming code check selection bit
VPS_SUB ^{for VPS data.}
0 Later 8bits of flaming code 16bits
Former 4bits and later 4bits of flaming
1 code 16bits (Select 8bits which is set in
VPS_FLC0 to 7)
Reserved bit
Must always be set to "1".
✕
Reserved bit
Must always be set to "0".
✕
SLI_VP0
SLI_VP1
SLI_VP2
SLSLVL
Acquisition start line selection bit
(Field 1 and 2 are common)
Stores data for 18 lines from
the 6th line,normally.
(SLI_VP2 to SLI_VPO = "316"
fixed)
If the acquisition start line is SLI_VS,
2
<Field 1> SLI_VS= ∑2ⁿSLI_VPn+3
n=0
2
<Field 2> SLI_VS= ∑2ⁿSLI_VPn+315
n=0
Stores data for 18 lines from line which
is set by this register to slice RAM.
0 Auto level for data acquisition
Acquisition level control bit
1 Fix level for data acquisition
Reserved bit
Must always be set to "0".
✕
SYNCSEP_ON0 ^{Synchronous separation}
control bit
0 Sync-sep circuit OFF
1 Sync-sep circuit ON
Reserved bit
Must always be set to "0".
✕
Rev. 1.0
155