PIC18F2450 Datasheet, PDF (93/320 Pages) Microchip Technology – 28/40/44-Pin, High-Performance, 12 MIPS, Enhanced Flash, USB Microcontrollers with nanoWatt Technology

PIC18F2450/4450
REGISTER 8-5: PIR2: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 2
R/W-0
U-0
R/W-0
U-0
OSCFIF
—
USBIF
—
bit 7
U-0
R/W-0
U-0
—
HLVDIF
—
U-0
—
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
bit 6
bit 5
bit 4-3
bit 2
bit 1-0
OSCFIF: Oscillator Fail Interrupt Flag bit
1 = System oscillator failed, clock input has changed to INTRC (must be cleared in software)
0 = System clock operating
Unimplemented: Read as ‘0’
USBIF: USB Interrupt Flag bit
1 = USB has requested an interrupt (must be cleared in software)
0 = No USB interrupt request
Unimplemented: Read as ‘0’
HLVDIF: High/Low-Voltage Detect Interrupt Flag bit
1 = A high/low-voltage condition occurred
0 = No high/low-voltage event has occurred
Unimplemented: Read as ‘0’
© 2006 Microchip Technology Inc.
Advance Information
DS39760A-page 91