English
Language : 

PIC18F2450 Datasheet, PDF (278/320 Pages) Microchip Technology – 28/40/44-Pin, High-Performance, 12 MIPS, Enhanced Flash, USB Microcontrollers with nanoWatt Technology
PIC18F2450/4450
21.3 DC Characteristics: PIC18F2450/4450 (Industrial)
PIC18LF2450/4450 (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Param
No.
Sym
Characteristic
Min
Max Units
Conditions
VIL
Input Low Voltage
I/O Ports (except RC4/RC5 in
USB mode):
D030
with TTL buffer
VSS
0.15 VDD V VDD < 4.5V
D030A
—
0.8
V 4.5V ≤ VDD ≤ 5.5V
D031
with Schmitt Trigger buffer
RC3 and RC4
VSS
0.2 VDD V
VSS
0.3 VDD V
D032
D032A
D033
MCLR
OSC1 and T1OSI
OSC1
VSS
0.2 VDD V
VSS
0.3 VDD V XT, HS, HSPLL modes(1)
VSS
0.2 VDD V EC mode(1)
VILU D+/D- Input
—
0.8
V VDD = 4.35V,
USB suspended(5)
VIH Input High Voltage
I/O Ports (except RC4/RC5 in
USB mode):
D040
with TTL buffer
0.25 VDD + 0.8V VDD
V VDD < 4.5V
D040A
2.0
VDD
V 4.5V ≤ VDD ≤ 5.5V
D041
with Schmitt Trigger buffer
RC3 and RC4
0.8 VDD
0.7 VDD
VDD
V
VDD
V
D042
D042A
D043
MCLR
OSC1 and T1OSI
OSC1
0.8 VDD
0.7 VDD
0.8 VDD
VDD
V
VDD
V XT, HS, HSPLL modes(1)
VDD
V EC mode(1)
VIHU D+/D- Input
IIL
Input Leakage Current(2,3)
2.4
—
V VDD = 4.35V,
USB suspended(5)
D060
I/O Ports
—
±1
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
D061
MCLR
—
±5
μA Vss ≤ VPIN ≤ VDD
D063
OSC1
—
±5
μA Vss ≤ VPIN ≤ VDD
IPU
Weak Pull-up Current
D070 IPURB PORTB Weak Pull-up Current
50
400
μA VDD = 5V, VPIN = VSS
Note 1:
2:
3:
4:
5:
In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PICmicro® device be driven with an external clock while in RC mode.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
Negative current is defined as current sourced by the pin.
Parameter is characterized but not tested.
D+ parameters per USB Specification 2.0.
DS39760A-page 276
Advance Information
© 2006 Microchip Technology Inc.