D20419-80 Datasheet, PDF (90/386 Pages) ITT Industries – Military/Aerospace

MIL-C-83733
DPK
Assembly/Shielded Contacts
Socket
249-1826-000/MIL-C-39029/51
Size 12/RG-179B/U Cable (used in 71C15 layout
.122 MIN. DIA.
(3.10)
FERRULE
BODY
INSULATOR
INNER SKT CONTACT
.148 ± .002 DIA.
(3.75 ± 0.05)
.084 ± .MIN. DIA.
(2.13)
.046 ± .002
(1.16 ± 0.50)
.160 ± .001
(4.06 ± 0.02)
.756 MAX.
(19.20)
.495 ± .005
(12.57 ± 0.13)
.187 ± .002 DIA.
(4.74 ± 0.05)
Pin
249-1826-000/MIL-C-39029/50
Size 12/RG-179B/U Cable (used in 71C15 layout
FERRULE
.084 MIN. DIA.
(2.13)
BODY
INSULATOR
INNER PIN CONTACT
.151 MAX. DIA.
(3.84)
.148 ± .002 DIA.
(3.75 ± 0.05)
.122 MIN. DIA.
(3.10)
.046 ± .002
(1.16 ± 0.05)
.880 MAX.
(22.35)
.118 ± .003
(3.00 ± 0.08)
.616 ± .005
(15.64 ± 0.13)
.094 ± .001
(2.38 ± 0.02)
.187 ± .002 DIA.
(4.74 ± 0.05)
Assembly Instructions
.510 ± .010
(12.95 ± 0.25)
FERRULE
DIELECTRIC
.340 ± .010
(8.64 ± 0.25)
.070 ± .010
(1.78 ± 0.25)
Step 1.
Strip outer jacket to dimensions shown to expose outer conductor.
OUTER CONDUCTOR SHALL
NOT EXCEED THIS EDGE
Step 2.
Slip (or install) ferrule over outer conductor against cable jacket.
Exposed portion of the outer conductor must be combed out then
folded back over ferrule.
Step 3.
Trim cable to dimensions, as shown. (Ferrule must butt against
cable jacket).
.403 REF.
(10.24)
INNER
CONTACT
Step 4.
Step 5.
Install inner contact against dielectric then crimp contact and center Insert cable,ferrule and inner contact to rear of shell and crimp
conductor with a M22520/2-01 cimp tool using a M22520/2-30
into place with M22520/5-03 crimp tool.
locator.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
90